This is a set of four AndyMark Mecanum wheels, sold in unassembled kits as four of am-2538. All four wheels use the same parts, you just assemble them in different configurations to create two left-handed and two right-handed wheels. With a load capacity of 50 pounds per set of four, these wheels are perfect for a smaller robot like the ones that compete in FIRST Tech Challenge. If your robot is going to be carrying around more than that, like most FIRST Robotics Competition robots do, check out the 4" HD Mecanum Set, (am-3067).
Here is where you can find replacement rollers: /product-p/am-2539.htm
Included Hardware:
Eight - Mecanum Body Halves
Fourty-Eight - Individual 4-40 x 1/2" PPHS
Fourty-Eight - Individual Rollers
Fourty-Eight - Individual Washers
Twenty-Four - Wheel Spindle
Twenty-Four - Individual 4-40 x 1" STS
Usage:
This wheel is designed to directly mount to any of our Nubs for gearbox attachment.
To use with Axle and Hub:
If you wish to drive this wheel with an Axle and Hub, you can pick your hub by fitting any of the AndyMark hubs (except the Small DD Globe Hub) to this wheel. Hubs are NOT included in the price of the wheel. If this is your choice, then no bearing is needed. To install a hub onto a 6" Mecanum Wheel, use Hardware Kit 2.
| # |
Installment Amount |
Total Price |
| # |
Installment Amount |
Total Price |
| # |
Installment Amount |
Total Price |
| # |
Installment Amount |
Total Price |
| # |
Installment Amount |
Total Price |
| # |
Installment Amount |
Total Price |
| # |
Installment Amount |
Total Price |
English
Türkçe
